Enermax Noisetaker EG701AX-VE-SFMA ATX 2.0 w/SLI Support 600W PSU
Item#: G701AX-VESFMA

Overview

Support nVIDIA SLi Technology

ATX 12V V2.0 compatible:
Support latest P4 Prescott and Athlon 64/64 FX processors based systems: P4 main boards that use 875 (Canterwood) and 865 (Springdale) chipsets, and also fully support power requirements for platforms using chipsets like Intel 925 (Alderwood) or 915 (Grantsdale) and next generation CPU.

Smart Fan:
After PC shuts down, cooling fans keep running for at least 2 minutes to effectively cool down parts and hardware inside PSU and PC case. Thus, ensure longer product life time of power supply and hardware inside PC case.

Dual Fan:
The best cooling method for PC system, and is strongly suggested by AMD.

Separate 12V rails:
Independent 12V rails supply to MB/CPU and drives in order to provide stable and clean current to noise-sensitive devices, such as: CPU, add-on cards.
Meet UL 240VA safety requirements offer a safer operating circumstance to users. S-ATA connectors:
Connect your system to the faster S-ATA interface for better performance.

Manual and automatic fan speed control:
Manual fan speed control to keep the balance between cooling effect and acoustic noise. Automatic fan speed adjustment to prevent system overheat.

Reliability:
OCP, UVP, OVP, OLP, OTP, and SCP circuits ensure system well guarded from any dangers. Maximize safety for your hardware and valuable data.

Ring Core:
Effectively prevents electro-magnetic pulse leaking from switching power supply to appliances that are being attached to the same power source, i.e. AC wall plug.

Active PFC function:
PF value ? 0.99 under condition of 230VAC/50Hz at full load.

Fan Monitor function:
RPM signal of 8cm fan is provided for MB detection.

Silence:
Acoustic noise is successfully reduced with two fans giving more airflow in less rpm and smooth mechanical design of fan guards.

Specification

• AC Input (G): 180~265V or (W): 90~265V(Adjusted Automatically)
• Lin(AC)=115V/230V N/A
• Lin(W):100~240VAC 9.5A~4A
• Frequency 47Hz~63Hz
• Inrush Current Limiting 80A /230V and 40A/115V max during cold start
• Hold up time 17ms at 115VAC or 230VAC, full load
• Over Voltage Protection +5V: 5.5V~7.0V +3.3V: 3.76V~4.3V +12V1 & +12V2: 13.4V~15.6V
• Over Load Protection 110~160% of max load
• Over Current Protection +3.3V: 55A (max) +5V: 48A (max) +12V1 & +12V2: 20A (max)
• Over Temp. Protection 90 C/ 194 F~100 C/ 212 F (?10%) at heat sink
• Under Temp. Protection 0C for heat sink (?2C)
• Operation Temperature 0C ~ 40C
• Storage Temperature -40C ~ 70C
• Humidity operation:to 85%, relative humidity, non condensing at 25C; Storage:to 95%, relative humidity, non condensing at 50C
• M.T.B.F. greater than 100k hours at 70% of full rated load; 230 VAC / 50Hz input; 25C ambient
• Dimentions W150 * H86 * D140 (mm)

DC Output	Rippe & Noise	Tolerance	Current(Min. / Max.)
+3.3V	50mV	?5%	0.5A/34A
+5V	50mV	?5%	0.3A/34A
+12V 1	120mV	?5%	0.5A/18A
+12V 2	120mV	?5%	0.5A/17A
-12V	120mV	?10%	0A/0.8A
+5Vsb	50mV	?5%	0A/2.5A
+12V Total			35A
Total power			600W

• EN55022 Class B
• EN61000-3-2 Class D
• EN61000-3-3
• EN61000-4-2 Class B
• EN61000-4-3 Class A
• EN61000-4-4 Class B
• EN61000-4-5 Class B
• EN61000-4-6 Class A
• EN61000-4-8 Class A
• EN61000-4-11 Class B
• FCC Part 15 & Part 2
• CNS 13438 Class B

• UL (Level 3)
• cUL (Level 3)
• VDE
• CB
• NEMKO
• SEMKO
• DEMKO
• FIMKO

• 8cm axial fan* 1
• 9cm axial fan* 1

Retail Box